Ø Detection of the deviation of effective prestress;
Ø Detection of the unevenness in the same bundle;
Ø Detection of the unevenness in the same section;
Ø Detection of the effective prestress of a single cable and the whole bundle of anchor cables.
Compliant specifications:
Technical Specification for Highway, Bridge and Culvert Construction ?JTG/T F50-2011?
Specification for Inspection and Acceptance of Construction Quality of Prestress and Cable Tension of Bridge (CQJTG/T F81-2009)
Technical Features?
1. Integrated tensioning method.is used to detect the effective stress of a single steel strand and the whole bundle of steel strands.
2. High level of safety. Set with the tensioning target, and tensioning warning value. Automatic presure application and judgement of curve inflection points.
3. Highly automated: stops immediately when the inflection point of the effective prestress value occurs, and counts immediately when the preset alarming values are set.
4. Guided operation process: Intelligently guides the operation, ensuring easier and simpler operation.
5. Highly efficient industrial-grade intelligent control system that features stable operation, clear boundary and flexible control.
6. High precision in displacement of the whole bundle, ensuring easy installation.
7. High compatibility. A on-site jack oil pump can be selected for testing.
8. Capability to calculate the unevenness of the force value in the same bundle and the same section. Avoids the test error caused by the uneven frictional resistance and the different heights of the exposed parts of clips.
9. Capability to detect the effective prestress of a single cable and the whole bundle, and it can make up the tension.
10. Prevents manual tensioning and errors in inflection point judging. Records the force and displacement curve for post-analysis and tracing.
11. Supports data uploading and data viewing through a cloud platform.
Performance indicators?
RSM-JCP (A) Tensile stress tester |
Numerical Control Box |
|||
Main control form |
Low power embedded system; Dominant frequency: ≥1GHz; Memory: 512M |
Channel for test of tensioning and expansion |
2 channels |
|
Display mode |
12.1 inch true color LCD Resolution: 1280 x 768 (backlight adjustable) |
Load test channel |
A channel for pressure sensor and another for force sensor. |
|
Communication mode |
Wireless/ wired |
Precision in expansion test |
Measurement error is less than ≤0.1%FS |
|
Wireless distance |
≥30m |
Measurement precision of load |
Better than or equal to 0.5 grade |
|
Power supply mode |
Detachable lithium battery, endurance time≥6h |
Power supply mode |
Endurance time≥12h, charged with a charger |
|
Operation mode |
Touch screen |
|
|
|
Storage capacity |
16G electronic hard disk |
|
|
|
Power |
≤20W |
|
|
|
Working temperature |
-20 to +50? |
|
|
|
Environment humidity |
≤85% |
|
|
|
Dimension |
340×270×73mm |
|
|
|
Weight |
2.0kg?lithium battery included? |
|
|
|
Special jack(a single cable) |
Hydraulic pressure system (a single cable) |
|||
Model |
Front clamping and space-limited jack |
Pressure range |
0-70MPa/0-100000kN |
|
Nominal tensile force |
250kN |
Maximum flux |
0.4L/min |
|
Nominal oil pressure |
53MPa |
Operation voltage |
220V(380V is optional) |
|
Diameter of Piercing hole |
φ19mm |
Dimension |
420x240X520mm |
|
Maximum tensioning travel |
110mm ( other travels are optional) |
|
|
|
Dimension |
φ114X410mm |
|
|
|
Note: The jack and oil pump for detecting the prestress of the whole bundle of anchor cables are additional configured as needed on site. |
|
|
Standard configuration:
Serial Number |
Name |
Number |
Specification & Model |
1 |
Tensile stress tester |
1 |
RSM-JCP(A) |
2 |
Load control box (antenna included) |
1 |
RSM-JCP |
3 |
Strong magnet antenna |
1 |
9DBI extended antenna |
4 |
Elipower adapter |
3 |
12V-5A |
5 |
Pressure sensor |
1 |
0.5 grade |
6 |
U disk |
1 |
|
7 |
Touch pen |
1 |
|
8 |
Yellow draw-bar box |
2 |
320A |
9 |
Acoustic wave network interface communication wire |
1 |
5m |
10 |
Tee (4-piece kit) |
1 |
|
11 |
Quick connector |
1 |
|
12 |
Numerical control box power supply input wire (4-core 3-meter female connector) |
1 |
|
13 |
Numerical control box power supply output wire (4-core 3-meter male connector) |
1 |
|
14 |
Single cable displacement connecting wire |
1 |
8 m |
15 |
Single cable jack |
1 |
Nominal tensile force: 250kN; Nominal oil pressure: 53MPa; Diameter of Piercing hole: 19mm; Maximum stroke of tensioning : 110mm
|
16 |
Oil Nozzle adaptor |
2 |
Custom copper connector |
17 |
Quick connector |
2 |
Female connector |
18 |
Oil pump DBZ70-0.4 |
1 |
220V |
19 |
High pressure oil pipe |
1 |
6m |
20 |
draw-wire displacement sensor |
1 |
200mm stroke |
21 |
Magnetic meter connected to sensor |
1 |
Install draw-wire displacement sensor |
22 |
Magnetic meter connected to sensor |
1 |
Install sensor connecting rod |
23 |
Sensor connecting rod |
1 |
|
24 |
Magnet |
1 |
20mm |
25 |
WI-PI USB WIFI |
1 |
|
26 |
Tool kits |
1 |
Including 2 open spanners, 1 screwdriver, 1 test pencil, one set of 220V bull plug and socket |